How to Add Analog Flavor and Vibe with the Scheps 73 Plugin by Waves | SonicScoop
Everything You Need to Know About the Scheps 73 Waves Plugin
scheps 73 waves crack code
Introduction
What is the Scheps 73 Waves plugin and what does it do?
The Scheps 73 Waves plugin is a software emulation of one of the most iconic and sought-after analog EQs in history: the Neve 1073. The Neve 1073 was designed by Rupert Neve in 1970 as a module for his 80 series mixing consoles, and it quickly became a staple in studios around the world for its warm, musical, and forgiving sound. The Neve 1073 consists of a mic preamp and a three-band EQ, with a fixed high shelf at 12kHz, a switchable low shelf with four frequencies (35Hz, 60Hz, 110Hz, and 220Hz), and a switchable mid-range bell with seven frequencies (0.36kHz, 0.7kHz, 1.6kHz, 3.2kHz, 4.8kHz, 7.2kHz, and 10kHz). The EQ also has an 18dB/octave high-pass filter with four frequencies (50Hz, 80Hz, 160Hz, and 300Hz). The Neve 1073 is known for its ability to add clarity, sheen, warmth, punch, and character to any source, from vocals to drums to guitars to synths.
The Scheps 73 Waves plugin aims to capture all the sonic characteristics of the original hardware unit, including its harmonic distortion, saturation, noise floor, frequency response, phase response, transient response, and nonlinear behavior. The plugin was developed in collaboration with Andrew Scheps, a Grammy-winning engineer who has used his own Neve 1073 modules extensively in his own mixes, and who has contributed some of his own ideas and customizations to the plugin design. The plugin is compatible with most digital audio workstations (DAWs) and supports AU, VST, RTAS, and AAX formats.
Who is Andrew Scheps and why did he collaborate with Waves on this plugin?
Andrew Scheps is a Grammy-winning engineer, producer, and mixer who has worked with some of the biggest names in the music industry, such as Adele, Red Hot Chili Peppers, Jay-Z, U2, Justin Timberlake, Green Day, Metallica, and many more. He is known for his versatile and creative approach to mixing, as well as his extensive use of analog and digital gear. He owns a collection of vintage and modern equipment, including several Neve 1073 modules that he uses on almost every mix. He has also developed his own signature plugins with Waves, such as the Scheps Omni Channel and the Scheps Parallel Particles. He collaborated with Waves on the Scheps 73 plugin to bring his favorite EQ to the digital domain and to share some of his personal tricks and tweaks that he has developed over the years.
What are the main features of the plugin and how do they emulate the original 1073 hardware?
The Scheps 73 plugin has three main sections: the preamp, the EQ, and the monitor. The preamp section allows you to adjust the input gain and drive of the plugin, as well as to switch between line and mic levels. The preamp section also emulates the harmonic distortion and saturation characteristics of the original Neve 1073 preamp, which can add warmth, color, and character to your sound. You can also bypass the preamp section if you only want to use the EQ section. The EQ section consists of three bands: a high shelf with a fixed frequency of 12kHz, a low shelf with four selectable frequencies (35Hz, 60Hz, 110Hz, and 220Hz), and a midrange bell with seven selectable frequencies (0.36kHz, 0.7kHz, 1.6kHz, 3.2kHz, 4.8kHz, 7.2kHz, and 10kHz). The EQ section also has an 18dB/octave high-pass filter with four selectable frequencies (50Hz, 80Hz, 160Hz, and 300Hz). The EQ section emulates the frequency response, phase response, transient response, and nonlinear behavior of the original Neve 1073 EQ, which can enhance your sound with clarity, sheen, warmth, punch, and musicality. You can also bypass the EQ section if you only want to use the preamp section. The monitor section allows you to adjust the output gain and level of the plugin, as well as to switch between stereo, mono, left-only, right-only, mid-only, or side-only modes. The monitor section also allows you to calibrate the VU meter according to your preference.
Benefits
How does the plugin sound and what are its advantages over other EQ plugins?
The Scheps 73 plugin sounds amazing on any source that needs some analog flavor and vibe. It can make your vocals shine with presence and airiness, your drums punch with weight and impact, your guitars sparkle with bite and edge, your bass groove with warmth and depth, your synths glow with richness and texture, and your mixes glue with cohesion and balance. The plugin has several advantages over other EQ plugins that make it stand out from the crowd. First of all, it faithfully recreates the sound of one of the most legendary and coveted EQs in history, which is hard to find or afford in its original form. Second of all, it offers some unique features that enhance its functionality and versatility beyond its hardware counterpart. For example, it adds a 10kHz midrange band that was not available on most Neve 1073 units but was part of its original design. It also allows you to process stereo or M/S signals with different EQ settings for each channel or mode. Third of all, it is easy to use and intuitive to operate thanks to its simple interface and responsive controls.
What are some of the custom features that Scheps added to the plugin and how do they enhance its functionality and versatility?
One of the custom features that Scheps added to the plugin is the ability to switch between line and mic levels for the preamp section. This allows you to adjust the amount of distortion and saturation that you want to apply to your signal without changing its level or headroom. For example, you can use the mic level to add more grit and edge to your sound, or use the line level to keep it more clean and transparent. Another custom feature that Scheps added to the plugin is the ability to adjust the output level of the EQ section independently from the preamp section. This allows you to balance the level of your signal after applying the EQ without affecting the drive or distortion of the preamp. For example, you can boost or cut the EQ bands without changing the input gain or output gain of the plugin. A third custom feature that Scheps added to the plugin is the ability to link or unlink the EQ bands for stereo or M/S processing. This allows you to apply different EQ settings to each channel or mode, or to apply the same EQ settings to both channels or modes. For example, you can boost the high shelf on one channel and cut it on another, or you can boost the midrange on the mid channel and cut it on the side channel.
How can the plugin be used on different types of audio sources and genres?
The Scheps 73 plugin is a versatile and flexible tool that can be used on any type of audio source and genre. It can enhance vocals, drums, guitars, bass, synths, keyboards, strings, brass, woodwinds, percussion, and more. It can also be used on buses, groups, submixes, and master tracks. It can handle any genre of music, from rock to pop to hip-hop to jazz to classical to electronic and beyond. The plugin can be used for various purposes, such as adding color and character, shaping tone and timbre, correcting frequency imbalances, enhancing dynamics and transients, creating contrast and separation, adding width and depth, and gluing elements together. The plugin can also be used for creative effects, such as adding distortion and saturation, creating filters and sweeps, generating harmonics and overtones, modulating frequencies and phases, and creating movement and modulation.
Drawbacks
What are some of the limitations or challenges of using the plugin?
The Scheps 73 plugin is a great sounding and easy to use plugin that emulates one of the best EQs ever made. However, it is not perfect and it has some limitations or challenges that you should be aware of before using it. One of the limitations of the plugin is that it is not a 1:1 copy of the original hardware unit. It is an approximation that tries to capture its essence and vibe, but it may not sound exactly like a real Neve 1073 in every situation or setting. The plugin may also behave differently depending on your system specifications, DAW settings, sample rate, buffer size, latency compensation, etc. Another limitation of the plugin is that it is not a transparent or surgical EQ. It is a colorful and musical EQ that adds its own flavor and character to your sound. This may be desirable in most cases, but it may also introduce some unwanted artifacts or side effects in some cases. For example, it may add some noise or hiss to your signal, it may alter your phase or transient response, it may create some aliasing or intermodulation distortion, etc. A third limitation of the plugin is that it is not a very flexible or precise EQ. It is a simple and intuitive EQ that has fixed frequencies and limited controls. This may be sufficient in most cases, but it may also be limiting or frustrating in some cases. For example, it may not have the exact frequency or bandwidth that you need, it may not have enough gain or attenuation range, it may not have enough bands or filters, etc.
Tips
How can you get the most out of the plugin and optimize its performance and workflow?
The Scheps 73 plugin is a powerful and easy to use plugin that can enhance your sound and workflow. However, there are some tips and tricks that you can use to get the most out of it and optimize its performance and workflow. Here are some of them:
Use the input gain and drive controls to adjust the amount of distortion and saturation that you want to apply to your signal. You can use the mic level to add more grit and edge, or use the line level to keep it more clean and transparent. You can also use the VU meter to monitor your input level and avoid clipping or overloading the plugin.
Use the output gain and level controls to adjust the level of your signal after applying the EQ. You can use the output gain to balance the level of your signal without affecting the drive or distortion of the preamp. You can also use the VU meter to monitor your output level and avoid clipping or overloading your DAW.
Use the monitor section to switch between stereo, mono, left-only, right-only, mid-only, or side-only modes. This can help you check your mix for phase issues, balance issues, mono compatibility, stereo width, etc. You can also use the monitor section to calibrate the VU meter according to your preference.
Use the EQ section to shape your tone and timbre with the three bands and the high-pass filter. You can use the high shelf to add presence and airiness, the low shelf to add warmth and depth, the midrange bell to add bite and edge, and the high-pass filter to remove unwanted low frequencies. You can also use the EQ section to create filters and sweeps by boosting or cutting a band and sweeping its frequency.
Use the link/unlink button to link or unlink the EQ bands for stereo or M/S processing. This can help you apply different EQ settings to each channel or mode, or apply the same EQ settings to both channels or modes. You can also use this feature to create contrast and separation between different elements in your mix.
What are some of the best practices and tips from Andrew Scheps himself on how to use the plugin effectively and creatively?
Andrew Scheps is a master of using the Scheps 73 plugin effectively and creatively. He has shared some of his best practices and tips on how to use the plugin in various interviews, videos, articles, etc. Here are some of them:
Use the plugin as a preamp before any other processing. This can help you shape your sound at the source and add some analog flavor and vibe.
Use the plugin as a tone shaper after any other processing. This can help you fine-tune your sound and add some finishing touches.
Use the plugin as a parallel processor on a separate track or bus. This can help you blend in some extra color and character without affecting your original sound.
Use the plugin as a creative effect by pushing it hard or using extreme settings. This can help you create some interesting sounds and textures that you may not get with other plugins.
Use the plugin on different types of sources and genres. The plugin is versatile and flexible enough to work on anything from vocals to drums to guitars to synths.
What are some of the resources and tutorials available online to help you learn more about the plugin and its applications?
If you want to learn more about the plugin and its applications, there are some resources and tutorials available online that can help you. Here are some of them:
The WAVES SCHEPS 73 EQ and Preamp Plugin User Guide is the official manual for the plugin that explains its features, controls, specifications, installation, and activation. It also provides some examples of how to use the plugin on different sources and genres.
The How to Use the Scheps 73 EQ Plugin Videos Waves is a video tutorial from Michael White that goes over the various features and controls of the plugin while demonstrating how to use the classic 1073 model on several audio tracks.
The Scheps 73 User Manual is a PDF document that provides a detailed overview of the plugin's interface and controls, as well as some tips and tricks from Andrew Scheps himself on how to use the plugin effectively and creatively.
The Neve 1073 EQ and Preamp Plugin - Scheps 73 Waves is the product page for the plugin on the Waves website that provides some information about the plugin's background, features, benefits, reviews, and system requirements. It also allows you to download a free demo version of the plugin or purchase it online.
Use Cases
What are some of the real-world examples and scenarios where the plugin has been used successfully by professional engineers and producers?
The Scheps 73 plugin is a popular and widely used plugin among professional engineers and producers who want to add some analog flavor and vibe to their mixes. Here are some of the real-world examples and scenarios where the plugin has been used successfully:
Andrew Scheps himself has used the plugin on many of his mixes, such as Adele's "Hello", Red Hot Chili Peppers' "The Getaway", Jay-Z's "Magna Carta Holy Grail", Metallica's "Hardwired...to Self-Destruct", and many more. He has also used the plugin on his own music projects, such as his band Lost in Stars.
Dave Pensado, another Grammy-winning engineer and mixer who has worked with artists such as Beyoncé, Justin Bieber, Christina Aguilera, and many more, has also used the plugin on some of his mixes. He has praised the plugin for its sound quality, ease of use, and versatility. He has also featured the plugin on his YouTube show Pensado's Place, where he shows how he uses it on different sources and genres.
Greg Wells, a multi-instrumentalist, songwriter, producer, and mixer who has worked with artists such as Katy Perry, Keith Urban, Adele, OneRepublic, and many more, has also used the plugin on some of his productions. He has complimented the plugin for its ability to add warmth, character, and musicality to any sound. He has also shared some of his tips and tricks on how he uses it on his website.
How can you apply the plugin to your own projects and achieve similar results?
If you want to apply the plugin to your own projects and achieve similar results as the professionals, here are some steps that you can follow:
Download a free demo version of the plugin or purchase it online from the Waves website.
Install and activate the plugin on your computer according to the instructions in the user guide.
Open your DAW and create a new project or load an existing one.
Insert the Scheps 73 plugin on any track or bus that you want to process with it.
Adjust the input gain and drive controls to set the amount of distortion and saturation that you want to apply to your signal.
Adjust the output gain and level controls to set the level of your signal after applying the EQ.
Adjust the EQ section controls to shape your tone and timbre with the three bands and the high-pass filter.
Use the link/unlink button to link or unlink the EQ bands for stereo or M/S processing.
Use the monitor section to switch between stereo, mono, left-only, right-only, mid-only, or side-only modes.
Compare your processed signal with your original signal by using the bypass button or the A/B comparison button.
Experiment with different settings and combinations to find the best sound for your source and genre.
Save your settings as a preset or load a preset from the plugin's library.
Conclusion
In conclusion, the Scheps 73 Waves plugin is a fantastic plugin that emulates one of the most iconic and sought-after analog EQs in history: the Neve 1073. The plugin was developed in association with world-renowned mixing engineer Andrew Scheps, who has used his own Neve 1073 modules extensively in his own mixes, and who has contributed some of his own ideas and customizations to the plugin design. The plugin faithfully recreates the sound of the original hardware unit, including its harmonic distortion, saturation, noise floor, frequency response, phase response, transient response, and nonlinear behavior. The plugin also offers some unique features that enhance its functionality and versatility beyond its hardware counterpart, such as adding a 10kHz midrange band, allowing you to switch between line and mic levels, allowing you to adjust the output level of the EQ section independently from the preamp section, and allowing you to link or unlink the EQ bands for stereo or M/S processing. The plugin sounds amazing on any source that needs some analog flavor and vibe, and it can be used for various purposes, such as adding color and character, shaping tone and timbre, correcting frequency imbalances, enhancing dynamics and transients, creating contrast and separation, adding width and depth, and gluing elements together. The plugin can also be used for creative effects, such as adding distortion and saturation, creating filters and sweeps, generating harmonics and overtones, modulating frequencies and phases, and creating movement and modulation. The plugin is easy to use and intuitive to operate thanks to its simple interface and responsive controls. The plugin is compatible with most digital audio workstations (DAWs) and supports AU, VST, RTAS, and AAX formats.
If you are looking for a colorful and musical EQ that can add warmth, clarity, punch, and character to your sound, you should definitely check out the Scheps 73 Waves plugin. You can download a free demo version of the plugin or purchase it online from the Waves website. You can also learn more about the plugin and its applications from the user guide, the video tutorial, the user manual, and other online resources. You can also follow some of the best practices and tips from Andrew Scheps himself on how to use the plugin effectively and creatively. You can also apply the plugin to your own projects and achieve similar results as the professionals who have used it successfully on their mixes. The Scheps 73 Waves plugin is a versatile and flexible tool that can enhance your sound and workflow in many ways.
Thank you for reading this article. I hope you found it helpful and informative. If you have any questions or comments about the plugin or the article, please feel free to contact me. I would love to hear from you. Have a great day!
FAQs
Here are